1. Project Overview & Key Specifications
A corporate client commissioned a 45-card promotional card deck for an executive company event. The project featured complex graphic design requirements: fine background tint lines across all card faces, individualised metallic gold foil stamping across more than 40 distinct card fronts, and a gold foil stamped rigid box lid.
- Product Format: 45-Card Corporate VIP Promotional Deck in Gilded Rigid Box
- Volume & Scala: Corporate Event Production Batch
- Core Substrates: 350Carta artistica GSM C2S, 1200gsm Industrial Greyboard, Jingyi 944 / 941 Foils
- Engineering Highlights: Sopra 40 Distinct Front Foil Dies, 200 LPI Line Compensation, Anti-Scratch Box Lid Foil
2. Client Background & Project Scope
The deck was designed as a branded keepsake distributed to attendees at a corporate company event. Each card represents a company milestone or core corporate principle.
The client visual design combined two demanding print requirements: an intricate background pattern composed of fine lines (below 0.1 mm stroke weight), combined with metallic gold foil stamping on both faces. The box lid was wrapped with a large-area gold foil design covering most of the upper surface.
3. Manufacturing Challenges
Sfida 1: Fine Background Line Clogging During Press Runs
During initial pre-press tests, the delicate background tint lines filled in with ink under standard offset press pressure, causing dark muddy patches. When ink density was lowered to keep the lines open, the solid dark background lost color depth.
Sfida 2: Precision Stamping Across 40+ Unique Foil Dies
Stamping over 40 distinct foil dies on 350gsm matte-laminated stock required consistent temperature and dwell control. If heat was too high, fine foil details bridged together; if too low, foil flaked off the matte film surface.
4. Engineering Solutions
1. Prepress Dot Gain Compensation and Exposure Tuning
We calibrated the prepress CTP plate curves specifically for fine line reproduction. Screen frequency was adjusted to 200 LPI (lines per inch) using FM-AM hybrid screening, and line weights were compensated in digital prepress by +0.015 mm.
Press operators ran test sheets across three ink feed densities, providing the client with physical draw-downs to confirm clear line separation without loss of background depth.
2. Multi-Plate Tooling and Temperature Calibration
We produced precision magnesium hot stamping dies using Jingyi 944 foil for the cards and Jingyi 941 foil for the rigid box lid. The automatic stamping press was calibrated to 110°C with 0.8 seconds dwell time and 12 MPa hydraulic pressure.
This combination produced clean, sharp foil edges on all 40+ unique card fronts and full, solid gold coverage across the box lid without pinholes or edge flaking.
3. Anti-Scratch Matte Protection on Rigid Box
The large 151.5 X 189.5 mm gold foil stamping on the box lid was protected by applying anti-scratch matte film to the 157gsm wrapper prior to stamping. This prevented scuffing during assembly and packing.
5. Deliverables & Production Sign-Off
The 45-card sets were collated in numerical sequence, checked under optical inspection cameras, and sealed in clear heat-shrink film. All fine background patterns printed cleanly without fill-in, e il 40+ unique foil dies registered accurately.
Production Verification Record: The client reviewed the calibrated test proofs, approved the background line resolution and foil clarity, and confirmed acceptance of the finished mass production run.
6. Full Technical Specifications
| Parameter | Manufacturing Specification |
|---|---|
| Card Dimensions | 88.5 X 126.5 mm |
| Conteggio delle carte | 45 cards per deck |
| Card Stock | 350gsm two-sided coated artboard |
| Stampa di carte | 4+4C offset with fine background tint line calibration |
| Card Lamination | Dual-sided matte thermal lamination film |
| Front Foil Stamping | Jingyi 944 gold foil (~80 x 40 mm, 40+ unique dies) |
| Back Foil Stamping | Jingyi 944 gold foil (~88.5 x 126.5 mm, shared die) |
| Corner Radius | Die-cut R5 rounded corners |
| Dimensioni della scatola | Base: 95.5 X 133.1 X 23.5 mm, Lid: 100.5 X 138.5 X 25.5 mm |
| Box Materials | 157gsm coated art paper over 1200gsm greyboard |
| Box Lamination | Single-sided anti-scratch matte thermal film |
| Box Lid Stamping | Jingyi 941 gold foil (~151.5 x 189.5 mm) |
| Confezione | Sequential collation, complete set heat-shrink wrapped |



















