1. Project Overview & Key Specifications
An educational company designed a study card set consisting of 42 large-format flashcards produced on 350gsm black core paper. The cards are packaged in a tall two-piece rigid box featuring an internal white EVA spacer block and a 3.0 mm reveal gap between the upper lid and lower base.
- Product Format: Large-Format Educational Study Deck (42 कार्ड / 40 Packed per Box)
- Volume & पैमाना: Production Batch with Repeat Procurement Scheduled
- Core Substrates: 350gsm Domestic Black Core Paperboard, 1200gsm Industrial Greyboard
- Engineering Highlights: 15μm Pre-Coated Anti-Curl Film, 106x8x115mm EVA Block, Calibrated 3.0mm Reveal Gap
2. Client Background & Project Scope
The deck is used by students and instructors for focused study sessions. Because the cards are handled repeatedly and viewed under overhead study lamps, the client specified opaque black core cardstock and low-glare matte lamination.
The box dimensions were fixed by the client’s retail shelving parameters. Because the box dimensions could not be altered, the internal white EVA spacer thickness had to be adjusted precisely after measuring the final compressed thickness of the 40-card deck.
3. Manufacturing Challenges
चुनौती 1: Card Curling on Large-Format Black Core Stock
Domestic black core paper has a softer fibrous core structure than standard white artboard. Because this deck used large-format cards, standard 12μm thermal lamination caused the finished sheets to curl toward the heat rollers, resulting in concave card warping after die-cutting.
चुनौती 2: Rigid Box Friction and 3 mm Seam Consistency
The client requested that the lid hold more firmly than the initial sample while maintaining an exact 3.0 mm reveal gap around the perimeter when closed. If the inner neck collar was slightly oversized, the lid became stuck; if undersized, the lid dropped loose and eliminated the reveal gap.
4. Engineering Solutions
1. Upgrade to 15μm Pre-Coated Anti-Curl Matte Film
To correct the card warping, our finishing department tested two lamination film types on the production press. We replaced standard 12μm thermal film with a specialized 15μm pre-coated anti-curl matte film.
Press operators balanced the top and bottom tension rollers, reduced the laminating temperature from 115°C to 102°C, and passed the sheets through decurling rollers. This balanced the mechanical draw on both paper faces, keeping the cards completely flat after die-cutting.
2. Deck Thickness Measurement and EVA Fitting
After running the cards through die-cutting and pressing, we measured the actual 40-card stack thickness using a digital caliper under 5 kPa standard packaging load. The white EVA foam block dimensions were finalized at 106 एक्स 8 एक्स 115 mm and bonded firmly inside the neck collar, supporting the cards at the intended display height.
3. Neck Collar Sizing for Calibrated Lid Grip
We adjusted the inner neck collar circumference by 0.4 mm and applied slight outer corner chamfering. This created a smooth slide-off friction feel while maintaining the required 3.0 mm reveal gap when fully seated.
5. Deliverables & Production Sign-Off
The finalized cards maintained flat stability under warehouse storage testing. The lid closed with smooth resistance and settled squarely at the 3.0 mm reveal gap.
Production Verification Record: The client reviewed the mass production proof, verified that card curl was eliminated, and approved the batch for distribution. The client confirmed plans to reorder in the upcoming purchasing cycle.
6. Full Technical Specifications
| Parameter | Manufacturing Specification |
|---|---|
| Card Dimensions | Calibrated large format |
| कार्ड गिनती | 42 cards printed, 40 cards packed per set |
| Card Stock | 350gsm domestic black core paperboard |
| कार्ड मुद्रण | 4+4C offset printing, unique front and back art |
| फाड़ना | 15μm pre-coated anti-curl matte thermal film |
| Corner Radius | Die-cut R5 rounded corners |
| बॉक्स आयाम | Lid: 117 एक्स 35 एक्स 50 मिमी, Base: 117 एक्स 35 एक्स 99 मिमी |
| Neck Extension | Inner collar extends 18 mm above lower base |
| Box Materials | 157gsm coated art paper over 1200gsm greyboard |
| Internal Insert | 106 एक्स 8 एक्स 115 mm high-density white EVA block |
| Lid Reveal Gap | 3.0 mm calibrated visual gap |
| पैकेजिंग | Cards packed in box, complete set heat-shrink wrapped |



















